All articles
Architecture

Buying an Apartment to Renovate: What to Check First

Vladimir Perovic Nov 15, 2026 4 min read 786 words

Updated:

An apartment needing renovation can be the starting point for a home that fits your life. New flooring, a kitchen and fresh paint will not resolve every problem, however. Before buying, establish whether the space can support your priorities and which changes require further investigation. The useful outcome of a viewing is a record of possibilities, constraints and unanswered questions, before committing to a deposit or construction.

Start with your needs, then assess the listing

Write down what is essential: separate bedrooms, a workspace, storage, an accessible entrance or a kitchen connected to the living room. Separate requirements from preferences. An empty apartment may feel generous until you draw a bed, wardrobes, dining table and circulation routes at their actual sizes.

Bring an available plan, a tape measure and a notebook. With the owner’s permission, photograph rooms and details needing review. Record ceiling heights, windows, doors, visible columns and service risers. A marketing plan is a starting reference, not a measured survey for design.

Compare the documents with the actual apartment

Check that the records identify the apartment you are viewing: address, floor, separate-unit identification, area and recorded use. RGZ’s public eCadastre access can support an initial check of property records and registered rights in Serbia. Have a lawyer and notary review encumbrances, recorded notices, ownership documents and the transaction documentation.

Ask for available building plans, approvals and records of previous alterations. An enclosed terrace, incorporated corridor or relocated kitchen may need clarification. A mismatch between the documents and physical space cannot be resolved simply by drawing a new furniture plan. Understand its implications before deciding to buy.

Layout: distinguish possibilities from assumptions

A wall looking thin or sounding hollow does not establish that it can be removed. Appropriate designers need to identify the structural system, load-bearing elements and the proposed intervention. An architect can explore layout options; structural changes require a structural engineer’s assessment.

Relocating a bathroom or kitchen depends on drainage positions, achievable pipe falls, ventilation, floor build-up and shared services. Check the clear height remaining after new floors and ceilings. Test furniture at realistic dimensions, including door swings, window access and everyday movement.

Services: ask for evidence

Ask when services were replaced and whether records exist. Socket positions do not establish the condition of cables, protective devices or capacity for new equipment. An electrician should assess the installation and planned loads. Do not open or test electrical equipment yourself.

For water, drainage, heating, cooling and ventilation, review connection locations, maintenance access and the boundary between the apartment’s systems and shared building services. Ask about leaks, recurring failures and pressure problems. Renovating one apartment cannot by itself fix a defective communal riser.

Damp, cracks, daylight and noise

Inspect corners, window surrounds, ceilings below terraces, wall-to-floor junctions and accessible areas behind furniture. Stains or a damp smell require investigation of the cause; fresh paint is not evidence that it has been resolved. Cracks cannot reliably be assessed solely from a photograph or the width of the visible mark.

If possible, visit at different times of day. Listen for traffic, the lift, ventilation equipment and neighbouring rooms. Consider orientation, shading and the view from a seated position. Windows, curtains and finishes may improve conditions, but cannot change the building’s location or guarantee silence.

You are also buying into a building

Ask the building manager about the roof, façade, lift, shared services, planned works and how they will be financed. Discuss contractor access, protection of shared areas, material deliveries and waste removal. Check house rules and the conditions for changes to façades or other shared elements, including an external air-conditioning unit.

The administrative and technical route depends on the actual work and the building’s status. Our adaptation guide (Serbian) can help you prepare questions; the project designer establishes the documentation and approvals needed for the particular intervention.

Build a budget around a defined scope

Separate essential repairs from desired improvements. Allow for design, investigations, documentation, logistics, equipment and any temporary accommodation alongside construction. Set a contingency according to identified risks rather than whatever remains after buying. The renovation calculator supports an initial scenario; a bill of quantities and comparable contractor quotations provide a more specific basis.

What to take away from the viewing

  • A plan with key dimensions and a sketch of the desired arrangement.
  • A record of documents reviewed and those still missing.
  • Photos and questions for the architect, structural engineer and services specialists as needed.
  • Separate lists of essential repairs, preferred changes and unresolved conditions.
  • A budget scenario and explicit reasons to defer the decision.

If the purchase depends on one essential change, such as creating another bedroom, investigate that possibility first. Contact us to discuss your project, with the plan, photographs and your priorities.

← Back to journal
SEARCH
Select Language